If you choose, you may purchase AZEK Adhesive at your local hardware store. AZEK Adhesive has a working time of 10 minutes and will be fully cured in 24 hours.

• If standard pvc cements are used, these products typically cure quickly which will result in limited working time and may reduce adhesive strength
• For best results, surfaces to be glued should be smooth, clean and in complete contact with each other
• To bond AZEK material to other substrates, various adhesives may be used - consult adhesive manufacturer to determine suitability

Fastening

For best results, use fasteners designed for wood trim and wood siding.

• These fasteners have a thinner shank, blunt point, and full round head
• To take advantage of the performance of AZEK products, use a highly durable fastener such as stainless steel
• Staples, small brads, and wire nails must not be used
• The fasteners should be long enough to penetrate the solid wood substrate a minimum of 1-1/2"
• Standard nail guns work well with AZEK trim products
• AZEK products should be fastened into a flat, solid substrate - fastening AZEK material into hollow or uneven areas must be avoided
• Pre-drilling is typically not required unless a large fastener is used or product is installed in low temperatures