Cap Driving Tool
Oz Post Cap Driving Tool
The Oz Post Cap Driving Tool is used to secure the compression collar to the Oz-Post on all round post models. (ISW-850, IS-600, GB-700 and HB-700)
This tool is a hinged…
Oz Puller with Post Clamp
Oz Puller with Post Clamp
Another great product from Oz-Post is the Oz-Puller™. The Oz-Puller is simply the best post puller available and is the perfect companion for anyone that needs to re…
$424.99
Oz-Hammer Electric Jackhammer
Oz-Hammer Electric Jackhammer
The OZ-TOOLS EL-1100 Breaker hammer is the plug-in-anywhere hammer that doesn't need a compressor.
It offers total portability, operating on a 115-/120-volt, AC…
$1397.54
Plug Clamp
Plug Clamp
The optional Plug Clamp is designed for removing concrete plugs where the post has broken or rotted off. It can grab concrete up to 18” round and is also great for removing Oz-Post…
$78.49
Post Clamp
Post Clamp
The Oz Post - Post Clamp is used in conjunction with the Oz Puller to pull wood or steel posts from the ground.…
$67.20
Post Level
Post Level
The Oz-Post Post level is a two way level that can be strapped on to the Oz-Post with a rubber band to keep it in place. This is helpful for making sure that you are driving the post in …
$5.99
Oz Puller:
Another great product from Oz-Post is the Oz-Puller™. The Oz-Puller is simply the best post puller available and is the perfect companion for anyone that needs to remove posts. The Oz-Puller™ is so effective and easy to use tool that you will wonder how you lived without one! To remove a post that has been set in concrete simply place the post clamp around the base of the post, engage the jack and pull the post out concrete and all! To move the extracted post just tilt the extractor back on to its heavy duty wheels and pull to the desired location. The post and concrete are safely cradled between the support frames even on rough or uneven terrain. The Oz-Puller is also great to remove Oz-Posts that have been used for temporary fencing or if they have been located incorrectly. With its wide base and powerful jack the Oz-Puller can get the job done quickly.
EL-1100:
The OZ-TOOLS EL-1100 Breaker hammer is the plug-in-anywhere hammer that doesn't need a compressor. It offers total portability, operating on a 115-/120-volt, AC/DC, 15 amp outlet or 2,500-watt generator. The grease-packed gearbox and hammer mechanism eliminate the uncertainty of job site lubrication, while the shock-mounted handles absorb vibration to reduce operator fatigue. A ServiceMinder brush system shuts off the Brute Breaker when brush replacement, lubrication, and preventive maintenance are needed. Tool Kit with extra brushes and grease. Features The plug-in-anywhere hammer--does not need a compressor Total portability: operates on 115/120-volt, AC/DC, 15 amp outlet or 2,500-watt portable generator ServiceMinder brush system shuts off the Brute Breaker when brush replacement, lubrication, or preventative maintenance is needed Grease-packed gearbox and hammer mechanism eliminate uncertainty of job site lubrication Shock-mounted handles absorbs vibration to reduce operator fatigue Tool retainer accepts standard 1-1/8-inch hex, bits Cart's 8-inch-diameter, ball-bearing wheels allow easy rolling over rough job sites Rugged 1-inch-diameter steel frame, for convenient storage and easy transportation 2 sockets hold any 1-1/8-inch hex collar insert tools
Plug Clamp:
The optional Plug Clamp is designed for removing concrete plugs where the post has broken or rotted off. It can grab concrete up to 18” round and is also great for removing Oz-Posts that have been located incorrectly. The pointed ends of the clamp fit into the holes on the Oz-Post sleeves for quick and easy removal. The Plug Clamp can also be used to remove the compression collar on all Oz-Post models designed for round posts. To remove the compression collar, put the pointed ends of the plug clamp below the bottom of the compression collar and very slowly engage the jack in an upward motion.
Related Information: Oz-Tools