Product Information
5 1/2 in x 36 in Square Wood

Oz-Post model T6-700 is designed for use in conjunction with the Oz-Deck plate for load bearing applications.

INSTALLATION: Option 1 – Jackhammer: use the Oz-Hammer model OH-01 and Hammer-Spacer model HSP-T6. Jackhammers are easy to operate and available to rent at all rental centers in the country. Oz-Post recommends an electric or gas powered jackhammer. Pneumatic jackhammers are also ok but they are often much heavier and unnecessary. Option 2 – Sledgehammer: cut scrap piece of wood about 8" and insert into the top sleeve. Strike the wood with the head of the hammer to drive the post into the ground. HINT: Be sure that the scrap piece is a loose fit so that it is not difficult to remove after the post is installed.

• Part No. 30410
• UPC No. 5214300142
• Your Post Size 6" x 6" (actual size) 5½" x 5½"
• Oz-Post® Length 36"
• Top Sleeve Length 6"
• Fin Length 30"
• Weight 9.5 lbs
• Case Part No. 30411
• Driver OH-01 Part No. 20420
• Hammer Spacer HSP-T6 Part No. 40420
• Warranty 25 years - Rust Perforation
• Material Hot Rolled Steel
• Finish Hot Dipped Galvanize to G120
• Recommended Hardware Wood Screws (#12 x 1¼)
• Alternative Attachment Polyurethane Glue
• Lateral Load Rating 750 lbs @ 36" Off the Ground
• Vertical Load Rating 200 lbs

Be the first to review this product!

Price: $29.99

• Tell a Friend
• Write review / comment