Vinyl Coated Chain Link Fittings and Hardware
Vinyl coated chain link fittings are used to make up an all vinyl chain link system. Available in green, brown and black they match our vinyl coated chain link fabric and vinyl coated chain link framework.
Vinyl Coated Brace Bands
Vinyl coated Chain link brace bands are used to attach all chain link fence horizontal rails, bottom tension wire, and occasionally barbwire to terminal fence posts.
This almost always includes the top rail, but may also include a bottom rail, midrail, braces, and truss rods.
Vinyl Coated Rail End Cups
Vinyl coated chain link rail end cups (rail ends or rail end caps) are used to attach top rail, mid rail or bottom rail chain link fence framework to terminal posts when constructing chain link fence. Order the appropriate rail end cup to fit your dimension of framework. Rail end cups are attached to terminal fence posts with a vinyl coated brace band and carriage bolt.
Vinyl Coated Line Rail Clamps
Vinyl coated Chain link line rail clamps, or boulevards as they are often called, are commonly used when installing a mid brace on chain link fences. They are also commonly found on baseball backstops. Secure with two nuts and bolts each; you may also install a self-tap screw for added support.
Vinyl Coated Tension Bands
Vinyl coated Chain link tension bands are used to attach the chain link fabric to the terminal posts.
Use one less than the height of fence you are installing, i.e. a 5' high fence uses 4 tension bands per hook-up.
Vinyl Coated Top Rail Sleeves
When using vinyl coated non-swedged or plain ended top rail, use vinyl coated top rail sleeves to join two pieces of top rail together.
Vinyl Coated Loop Caps
Vinyl coated Chain link loop caps are installed on line posts and used to secure top rail. Order one per line post. Do not use these if barbwire is to be installed.
Vinyl Coated Chain Link Post Caps
From 1 5/8" all the way up to 6 5/8", we carry vinyl coated chain link post caps to finish your all vinyl chain link job with style.
Vinyl Coated Barbarms
Vinyl coated barbarms are chain link fence fittings used to string barbed wire to the top of a chain link fence. There are many different types of barbarms depending on your specific fencing application and layout. Vinyl coated barbarms are available in 3 PVC finished; black, green and brown. They are designed to fit 2 in or 2 1/2 inch chain link posts and will work with 1 5/8 inch top rail.
Vinyl Coated Gate Corners
Vinyl gate corners are angled fence parts that join the corners of a chain link gate without welding. Simply screw or bolt the gate frame to the corners to make a complete gate frame.
Vinyl Coated Chain Link Gate Hinges
We also carry vinyl coated male and female strap hinges to match your vinyl chain link system.
Vinyl Coated Chain Link Gate Latches - including forks and fork clamps
We carry a wide assortment of vinyl coated, colored fork latch parts, including clamps for the gate frame and fork latches for the latching post. Vinyl coated fork latch clamps are designed to fit 1 3/8 in, 1 5/8 in, or 2 in gate frames. The vinyl coated forks are designed to fit latch posts that measure 1 3/8 in, 2 in, 2 1/2 in or 3 in. We sell latch components that are coated with a heavy duty 10-14 mil PVC coating in black, brown or green. This is a higher level of coating than polyester.
Vinyl Coated Industrial Arm Hinges
Vinyl coated Industrial Arm Hinges are used on commercial grade chain link installations with 3", 4" or 6 5/8" gate posts.
Vinyl Coated Truss Rod Assemblies - Truss Rods and Truss Rod Tighteners
Truss rods and truss rod tighteners are used when braces and trusses are installed on chain link fences. Bracing and trussing a chain link fence keeps the posts plumb , for example end, corner, and gate posts under the stress of tightly stretched chain link. Braces and trusses are usually installed just after posts have set up in concrete and before the chain link fabric is installed.
Vinyl Coated Tension Bars
Chain link tension bars are used to secure chain link fabric to terminal posts (end posts and corner posts) and gate posts. Tension bars simply slide into the chain link fence diamonds. Order one vinyl coated tension bar per hook-up, same length as height of fence being installed. Our vinyl coated PVC colored tension bars come in 3 colors; black, brown and green.
Vinyl Coated Utility, Tension and Barbed Wire
We carry heavy colored tension wire, 9 gauge utility wire and even vinyl coated barbed wire in black, green and brown.
Vinyl Coated Tie Wires and Hog Rings
Colored hogs rings are made of aluminum and coated with brown, green or black PVC. Tie wires available in 9 or 6 gauge.
Touch-up Paint for Colored Chain Link Fence and Chain Link Parts
Every once in a while you might need to touch up some scuffs or scratches on your vinyl coated chain link fence or gate. We have color-matched paint for our vinyl chain link fittings and framework in black, green and brown.
Related Information: Vinyl Coated Chain Link Fittings and Hardware