Image Gallery:

Product Information
4" Pressed Steel Butt Hinge

These chain link gate hinges are priced per hinge, not by the pair. Two are required for most single gates, four are required for most double gates. Gates taller than 8' should have three hinges per leaf. These hinges will fit 1-5/8" O.D. and 2" O.D. gate uprights simply by moving the collar on hinge. Hinges are very easy to install and are recommended if gates are to be automated. The larger portion of the hinge simply bolts around the gate post. The smaller portion, or collar, wraps around gate upright. The collar does not fit snug around gate. The hinge must be positioned so that one of the horizontal rails rests on the collar. You may bolt hinges just below the top horizontal rail, or build your gates so that they have a longer leg on one side to slide into the butt hinge.Standard chain link gate butt hinge shown with 180 degree adapter installed. These hinges allow for a 90 degree swivel in either direction. The U-bolts bolt around gate frame, 1-5/8" or 2", and the 'leg' portion simply slides into butt hinge.

• Pressed Steel
• Galvanized for rust resistance
• 1 5/8" to 2" gate frame
• 4" gate post
  

Be the first to review this product!

Price: $15.15

• Tell a Friend
• Write review / comment